Advanced Mining offers the world's widest range of equipment for rock drilling, rock excavation, processing, demolition, bulk-materials handling and equipment for surface and underground mining.
Sandvik surface tophammer drill rigs are equipped with powerful hydraulic rock drills. Renowned for high penetration rates, great reliability, excellent fuel economy and low operating costs, they are diesel-powered, self-propelled and equipped with onboard compressors and dust collectors. Models range from lightweight rubber-tired rigs to extremely powerful crawler drills with ergonomic operator’s cabs, mechanized rod handling and intelligent drilling systems. Hole diameter range: 22-150 mm.
Sandvik DPi series intelligent surface top hammer drill rigs are a result of 10 years experience in drilling in quarries and open pits in the hole range of 89 - 152 mm. Fully equipped, the new generation intelligent rigs produce information, among others, on the condition of the drill and the work performed. Clever drilling parameter set up, simple user interface, advanced ROPS/FOPS certified safety cabin, and step by step trouble shooting instructions make the drilling process smooth and efficient. The DPi series technical solutions also respect the environment. Compared with similar conventional models, the DPi rigs consume 15% less fuel. In standard 2500 yearly engine hours, this means a reduction of 35 tons in CO2 emissions. In addition, a patented dust binding system keeps the air fresh and the dust levels in an all-time low.
Model | Hole range mm |
Rock Drill | On-board compressor | Engine kW |
Weight kg |
DP1500i | 89-152 | HL 1560T, 33 kW |
14 cu.m/ min up to 10 bar |
261 | 21800 |
DP1100i | 89-140 | HL 1060T, 25 kW |
14 cu.m/ min up to 10 bar |
225 | 21700 |
Sandvik DX self-propelled, self-contained hydraulic crawler drill rigs have a revolving superstructure, articulated boom and can handle very rough terrain. With an ergonomic operator’s cab, powerful hydraulic rock drill and mechanized rod changer, they drill quality holes from 51-127 mm in diameter to depths of up to 25 meters. The DX rigs huge coverage area that lets you drill more holes, faster, from a single set-up. Their power, precision and versatility make them an ideal choice for construction, quarrying or surface mining operations.
Models | Former name | Hole range mm |
Rock Drill | On-board compressor |
Engine kW |
Weight kg |
DX800 | Tamrock Ranger 800 | 76-127 | HL 810 T, 21 kW |
9.5 cu. m/min/ 4-10 bar |
168 | 14900 |
DX780 | Ranger 780 | 76-115 | HL 810 T, 19.5 kW |
8.1 cu. m/min/ 4-10 bar |
168 | 14800 |
DX700 | Ranger 700 | 76-115 | HL 710, 19.5 kW |
8.1 cu. m/min/ 4-10 bar |
168 | 14800 |
DX680 | Ranger 680 | 64-102 | HL 650, 17.5 kW |
6.2 cu. m/min/ 4-10 bar |
168 | 14500 |
DX500 | Ranger 500 | 51-89 | HL 510, 15.5 kW |
6.2 cu. m/min/ 4-10 bar |
168 | 14500 |
Sandvik DC 550, DC560 and DC700 rigs are of classic design with mast-mounted drilling controls, maneuverable chassis, fast tramming and quick rod handling. All rigs are self-contained and equipped with powerful hydraulic rock drills. The hole diameter range covered by the three series is 41-127 mm.
Models | Former name | Hole range mm |
Rock drill | On-board compressor | Engine kW |
Weight kg |
DC700 | Tamrock CHA 700 | 64-102 | HL 710, 17.5 kW |
8.1 cu. m/min/ 4-10 bar |
168 | 12700 |
DC560 | Tamrock CHA 560 | 51-89 | HL 510, 15.5 kW |
5.5 cu. m/min/ 4-10 bar |
168 | 12300 |
DC550 | Tamrock Dino 560 | 51-89 | HL 510, 15.5 kW |
5.5 cu. m/min/ 4-10 bar |
168 | 11400 |
The Sandvik DC120, DC121R, DC125R, DC301R and DC302R drill rigs are mounted on a compact, diesel-driven, 4-wheel drive rubber-tired carrier. Completely self-contained, they are safe, agile, highly productive and very easy to operate. Exceptionally mobile and easy to transport, they are ideal for public works, with applications in rock excavation, foundation drilling, road cutting, trenching, rock bolting and demolition.
Models | Former name | Hole range mm |
Rock drill | Compressor | Control system |
Engine kW |
Weight kg |
DC301R | Tamrock Commando 300 | 38-64 | HL 300, 8 kW |
2,5 cu. m/ min/4-8 bar |
electronic remote | 61 | 5300 |
DC302R | Tamrock Commando 300 R | 38-64 | HL 300, 8 kW |
2,5 cu. m/ min/4-8 bar |
electronic remote | 61 | 5300 |
DC120 | Tamrock Commando 120 H | 22-45 | HEX 1, 5.5 kW |
1,2 cu. m/ min/4-8 bar |
direct hydraulic | 37 | 2710 |
DC121R | Tamrock Commando 120 E,R | 22-45 | HEX 1, 5.5 kW |
1,2 cu. m/ min/4-8 bar |
radio remote for boom and drilling control/direct hydraulic for tramming | 37 | 2800 |
DC125R | 22-45 | HEX 1, 5.5 kW |
1,2 cu. m/ min/4-8 bar |
radio remote | 37 | 3150 |
Driller’s Office is a practical software tool for surface drilling process management, offering better drilling accuracy, hole quality and blasting results.