Advanced Mining offers the world's widest range of equipment for rock drilling, rock excavation, processing, demolition, bulk-materials handling and equipment for surface and underground mining.
Sandvik raise-boring heads optimize the performance of the boring machine by having high penetration rates, great stability, low vibration and low torque demands. Together with our high-performance pilot bits, they enable shafts and holes from 0.66 to 6.0 meters in diameter to be bored to depths (or lengths) of up to 1000 meters quickly, economically and safely. Sandvik raise-boring heads are quick to assemble, have low maintenance demands and give very long service life.
Sandvik pilot bits, made especially for raise boring, are of the roller-cone type with cemented tungsten-carbide buttons and sealed bearings. Intended for use with water flushing, they are designed for long holes and a wide range of rock conditions, making them the best possible insurance against bit-related trip-outs.
Model | Diameter mm (in) | Pin size API reg. in | Weight kg (lb) |
---|---|---|---|
Pilot bit | 229 (9) | 4 1/2 | 45 (100) |
Pilot bit | 251 (9 7/8) | 6 5/8 | 62 (137) |
Pilot bit | 279 (11) | 6 5/8 | 75 (165) |
Pilot bit | 311 (12 1/4) | 6 5/8 | 100 (220) |
Pilot bit | 349 (13 3/4) | 6 5/8 | 120 (164) |
Pilot bit | 381 (15) | 7 5/8 | 160 (353) |
Sandvik blind hole (boxhole) boring heads are designed to bore upward, with or without a pre-drilled pilot hole, to produce slot raises, ore passes etc. where there is no access to the upper level. The head is always guided and stabilized frontally, aided by rear stabilizers in the drillstring under the head.
Models | Raise diameter mm (in) |
Cutters number |
Total weight kg (lb) |
CBH 5 | 1524 (60) | 8 | 4450 (9820) |
Sandvik down-reamers are designed to bore downward, guided frontally in a pre-drilled pilot hole that leads to an existing opening. They are used mainly in cut-and-fill mining operations to bore passages into mined-out stopes, which are then filled with waste material. However, down-reamers can be an option wherever it is impossible, impractical or not safe to mount the reaming head from below.
Models | Reaming diameter mm (in) |
Pilot hole diameter mm (in) |
Total weight kg (lb) |
CDH 3 | 1060 (42) | 279 (11) | 2350 (5170) |
CDH 6 | 1870 (74) | 349 (13 3/4) | 4900 (10780) |
All Sandvik reaming heads consist of a base unit, to which various components are bolted. The type, number, combination and configuration of components can be tailored to the demands of the application. The head structure of smaller reamers is usually integral, while that of larger units can be integral, segmented and extendable to various sizes. This makes them very versatile, easy to transport and easy to reuse on other projects, keeping capital investment to a minimum.
Models | Reaming diameter mm (in) |
Pilot hole mm (in) |
Total weight kg (lb) |
CRH 2 | 660 (26) | 228-311 (9-12 1/4) | 1050 (2310) |
CRH 2SP | 660 (26) | 228-311 (9-12 1/4) | 1325 (2915) |
CRH 3 | 950 (37 3/8) | 200 (7 7/8) | 1450 (3190) |
CRH 3 | 1060 (41 3/4) | 229-311 (9-12 1/4) | 2600 (5730) |
CRH 4 | 1420 (55 7/8) | 229-311 (9-12 1/4) | 3250 (7160) |
CRH 5 | 1524 (60) | 229-311 (9-12 1/4) | 4050 (8930) |
CRH 6 | 1829 (72) | 229-311 (9-12 1/4) | 4850 (10690) |
CRH 6S | 1829 (72) | 229-311 (9-12 1/4) | 4950 (10910) |
CRH 7 | 2134 (84) | 279-311 (11-12 1/4) | 5600 (12350) |
CRH 7S | 2134 (84) | 279-311 (11-12 1/4) | 5800 (12790) |
CRH 8 | 2440 (96) 2447 (96) |
279-311 (11-12 1/4) 279-311 (11-12 1/4) |
6500 (14330) 6500 (14330) |
CRH 8S/8D | 2440 (96) 2447 (96) |
279-311 (11-12 1/4) 279-311 (11-12 1/4) |
7000 (15660) 7000 (15660) |
CRH 8L | 2440 (108) 2743 (108) |
311-349 (12 1/4-13 3/4) 311-349 (12 1/4-13 3/4) |
7500 (16520) 7500 (16520) |
CRH 9L | 2440 (108) 2743 (108) |
311-349 (12 1/4-13 3/4) 311-349 (12 1/4-13 3/4) |
8350 (18370) 8350 (18370) |
CRH 10D | 3094 (122) | 311-349 (12 1/4-13 3/4) | 10250 (20500) |
CRH 10SD | 3094 (122) | 311-349 (12 1/4-13 3/4) | 10450 (20900) |
CRH 10E | 3130 (123) 3500 (138) 3687 (145) 3824 (150) 4042 (159) |
311 (12 1/4) 349 (13 3/4) 349 (13 3/4) 349 (13 3/4) 349 (13 3/4) |
11100 (24450) 13550 (29850) 15050 (33150) 14750 (32500) 16850 (37125) |
CRH 12E | 3840 (151) 4500 (177) 5520 (217) 5876 (231) |
349-381 (13 3/4-15) 349-381 (13 3/4-15) 349-381 (13 3/4-15) 349-381 (13 3/4-15) |
32550 (71696) 32550 (71696) 32550 (71696) 32550 (71696) |