Emergency devices

Emergency devices from Sandvik enhances safety around a conveyor by stopping a conveyor in case of an accident. These emergency devices are based on the European standard EN620 and EN418 of the bulk handling conveyors. All devices are tested in the harsh climatic conditions in Scandinavia and can be ordered and operated individually.

Features and values

• Increases safety.
• Reliable operating.

Models

ES1/2

This pull cord emergency device is designed to be used in short belt conveyors, in easy applications. The emergency device package consists of the standard parts set ES1 and the cord set ES2. Both sets need to ordered separately.

Key specifications HB110

Switch type, right	XY2-CE1C250
Switch type, left	XY2-CE2C250
Number of cord wheels	0, 1 or 2

ES 5/2

This pull cord emergency device is suitable for hard conditions and when cord break-downs must be detected. The emergency device package consists of the standard parts set ES5 and the cord set ES2. Both sets need to ordered separately.

Key specifications HB110

Switch type	T3Z068-11YR-G-1172
Pulling direction	left or right
Number of cord wheels	0, 1 or 2

ES30

The safety switch prevents the conveyor from being started. During the work at the conveyor, the switch is turned to the 0-position. Additionally, the turning of the switch to the operating position can be prevented with a separate lock. Selection of four different sizes.

Key specifications HB110

Switch type

KUM316T, KUM325T, KUM336T, KUM363T